February 6, 2019
Millions of tons of the world’s plastic waste could be turned into clean fuels, other products through chemical conversion
WEST LAFAYETTE, Ind. – The United Nations estimates that more than 8 million tons of plastics flow into the oceans each year. A new chemical conversion process could transform the world’s polyolefin waste, a form of plastic, into useful products, such as clean fuels and other items.
“Our strategy is to create a driving force for recycling by converting polyolefin waste into a wide range of valuable products, including polymers, naphtha (a mixture of hydrocarbons), or clean fuels,” said Linda Wang, the Maxine Spencer Nichols Professor in the Davidson School of Chemical Engineering at Purdue University and leader of the research team developing this technology. “Our conversion technology has the potential to boost the profits of the recycling industry and shrink the world’s plastic waste stock.”
Wang, Kai Jin, a graduate student, and Wan-Ting (Grace) Chen, a postdoctoral researcher at Purdue, are the inventors of the technology, which can convert more than 90 percent of polyolefin waste into many different products, including pure polymers, naphtha, fuels, or monomers. The team is collaborating with Gozdem Kilaz, an assistant professor in the School of Engineering Technology, and her doctoral research assistant, Petr Vozka, in the Fuel Laboratory of Renewable Energy of the School of Engineering Technology, to optimize the conversion process to produce high-quality gasoline or diesel fuels.
The conversion process incorporates selective extraction and hydrothermal liquefaction. Once the plastic is converted into naphtha, it can be used as a feedstock for other chemicals or further separated into specialty solvents or other products. The clean fuels derived from the polyolefin waste generated each year can satisfy 4 percent of the annual demand for gasoline or diesel fuels. Some results of Wang’s study were published Jan. 29 in ACS Sustainable Chemistry and Engineering. A video about the process is available here.
Wang became inspired to create this technology after reading about the plastic waste pollution of the oceans, ground water, and the environment. Of all the plastics produced over the past 65 years (8.3 billion tons), about 12 percent have been incinerated and only 9 percent have been recycled. The remaining 79 percent have gone into landfills or the oceans. The World Economic Forum predicts that by 2050 the oceans will hold more plastic waste than fish if the waste continues to be dumped into bodies of water.
Wang said the technology could convert up to 90 percent of the polyolefin plastic.
“Plastic waste disposal, whether recycled or thrown away, does not mean the end of the story,” Wang said. “These plastics degrade slowly and release toxic microplastics and chemicals into the land and the water. This is a catastrophe, because once these pollutants are in the oceans, they are impossible to retrieve completely.”
The work aligns with Purdue's Giant Leaps celebration, acknowledging the global advancements in sustainability as part of Purdue’s 150th anniversary. This is one of the four themes of the yearlong celebration’s Ideas Festival, designed to showcase Purdue as an intellectual center solving real-world issues.
Wang said she hopes her technology will stimulate the recycling industry to reduce the rapidly rising amount of plastic waste. She and her team are looking for investors or partners to assist with demonstrating this technology at a commercial scale.
About Purdue Office of Technology Commercialization
The Purdue Office of Technology Commercialization operates one of the most comprehensive technology transfer programs among leading research universities in the United States. Services provided by this office support the economic development initiatives of Purdue University and benefit the university's academic activities. The office is managed by the Purdue Research Foundation, which received the 2016 Innovation and Economic Prosperity Universities Award for Innovation from the Association of Public and Land-grant Universities. For more information about funding and investment opportunities in startups based on a Purdue innovation, contact the Purdue Foundry at email@example.com. For more information on licensing a Purdue innovation, contact the Office of Technology Commercialization at firstname.lastname@example.org.
Writer: Kelsey Henry, 765-588-3342, email@example.com
Purdue Research Foundation Contact: Cynthia Sequin, 765-558-3340, firstname.lastname@example.org
Source: Nien-Hwa Linda Wang, email@example.com
William Buchanan, firstname.lastname@example.org
Note to Journalists: A copy of the research paper is available from Tom Coyne, 765-588-1044, email@example.com
About five billion tons of plastic waste have accumulated in landfills and the natural environment over the past 50 years. Polypropylene (PP) waste accounts for about 23%
of the total plastic waste. Converting PP waste into useful products can reduce the accumulated waste and associated risks to the environment and human health. In this study, model PP was
converted into oil using supercritical water at 380−500 °C and 23 MPa over a reaction time of 0.5−6 h. Up to 91 wt % of model PP was converted into oil at 425 °C with a 2−4 h reaction time or at 450 °C with a 0.5−1 h reaction time. Higher reaction temperatures (>450 °C) or longer reaction times (>4 h) led to more gas products. The oil products consisted of olefins, paraffins,
cyclics, and aromatics. About 80−90 wt % of the oil components had the same boiling point range as naphtha (25−200 °C) and heating values of 48−49 MJ/kg. Reaction pathways for converting model PP into oil under the tested conditions were proposed. Preliminary analyses indicate that this conversion process is net-energy positive and potentially has a higher energy efficiency and lower greenhouse gas emissions than incineration and mechanical recycling. The oil derived from PP has the potential to be used as gasoline blendstocks or feedstocks for other chemicals.