Haas NGC: Locating Program Zero on the Lathe 212

Haas NGC: Locating Program Zero on the Lathe describes important concepts related to program zero, or part zero, on the Haas Next Generation Control (NGC) lathe. Part zero is the starting point for all machine operations on the lathe. It is most often located at the center of the finished part face. Lathe operators must determine the most effective approach to locating part zero for each workpiece and operations. Methods for locating part zero vary based on the operator’s approach to setting tool length offsets. After taking this course, operators will be able to distinguish between the different methods for locating part zero and the different factors that determine which approach is best. Operators will also understand the appropriate steps for locating part zero on the Haas NGC lathe with each method. This knowledge will allow them to operate lathes effectively and efficiently.