Radiological & Environmental Management Division of Environmental Health and Public Safety

Radioactive Materials

Radioactive Materials Purchasing

Why it is Important REM Approve Radioactive Materials

For obvious reasons, radioactive material is a restricted commodity. Users must go through radiation safety training and the project approval process before they can begin ordering and using radioactivity. In addition, REM must approve all isotope orders. The approval process enables us to maintain an inventory of all radioisotopes on campus as is required by the Nuclear Regulatory Commission (NRC). The process also helps us ensure an order does not exceed limits set on individual projects. When placing an order in Ariba, please use the Product Category code for "Radioisotope Sources". Use of this category automatically adds REM to the order approval work flow.

To comply with Purchasing Services requirements we must use Ariba to order almost everything. This includes radioactive materials. In addition, to maintain compliance with Department of Transportation (DOT) and NRC regulations, all packages containing radioactive material must go through a required check-in process. Therefore, they must be shipped to:

Hampton Hall of Civil Engineering
Radiation Safety, Room B203
550 Stadium Mall Drive
West Lafayette, IN 47907-2051

When ordering, use the Radioactive Material Requisition (Form R-1) which can be saved to your computer, filled out, and emailed to the person in charge of placing orders in your area. This will ensure the person actually entering the order into Ariba knows it is a radioisotope order. That Form R-1 should then be attached to the Ariba order so REM can print it when approving the order. We will then be able to provide you with a copy of the Form R-1 for your records that includes the assay information pertinent to your order. Use the imbedded links on this page for the Form R-1 or it can be found on the Forms page.

Ariba orders will be checked by REM each day by noon, so please get your radioisotope orders in before noon for approval that day. Please be aware, however, that once an order is approved by REM, it may still need approval from your department's Fiscal Approver and from Purchasing before it will be faxed to the vendor. Since each vendor has their own cut-off time for shipping, there is no guarantee an order placed today will arrive at Purdue the next day. Vendors also celebrate most of the same holidays as Purdue and do not ship over long holiday weekends. Please plan accordingly and, if possible, place your order at least 3 business days before you need it.

If you have any questions about whether or not an order is considered radioactive, or if you are not sure how to include some of the required information, please contact REM Radiological Management. They will be happy to help in any way they can to get your order placed promptly.

Form R-1: Radioactive Material Requisition

We have price quotes for several of our most common isotopes that are significantly lower than the list price. If you have a special order or will be ordering a new product more frequently, please contact REM Radiological Management to get a new price quote.

Vendor Information & Links:

Iodination Facilities

Radioactive iodine is used in several procedures on campus. The radiation safety staff is concerned mainly with iodination procedures. These procedures can be very cost effective for researchers, but several additional safety considerations must be met. Due to the volatility of the compounds used, air monitoring is involved as well as thyroid bioassays post-experiment to assure that no iodine uptake occurred. Before doing any iodinations, please contact REM Radiological Management for an air filter as well as an appointment for a bioassay. These safety considerations are extremely important in preventing unnecessary exposure.

Radiation Calculators

Some websites that may be helpful for calculating radioactive decay and/or doing radioactivity unit conversions are listed below.

Decay Calculators

Radioactivity Unit Conversions

Dosimetry

Radiation dosimetry is used to track exposure from high energy isotopes and X-ray producing devices. REM determines what type of dosimeter(s) you will need based on the degree of hazard you will be working with. There are several situations in which dosimeters are not required.

When you submit a Form A-4 (Application to Use Radioactive Materials and/or Radiation-Producing Devices) and complete the required training, the determination for dosimetry will be made. Training instructions may be found on the Radiation Safety Training page.

If you have any other questions, please contact the REM Radiological Management section for assistance.

 

Campus Safety Contacts

call 911

If you see something, say something.

Purdue Police
Phone: (765) 494-8221

Purdue Fire
Phone: (765) 494-6919

REPORT A SAFETY CONCERN

Sign up for Emergency Text Messages

Carol Shelby, Senior Director

Phone:
(765) 494-7504
Email: 
cshelby@purdue.edu
Do you want to recognize one of our staff for a job well done? Nominate the staff member(s) for a Bravo Award here!

Purdue University, 610 Purdue Mall, West Lafayette, IN, 47907, 765-494-4600

© 2019 Purdue University | An equal access/equal opportunity university | Integrity Statement | Copyright Complaints | Brand Toolkit | Maintained by Administrative Operations

Contact Administrative Operations for accessibility issues with this page | Accessibility Resources | Contact Us