June 27–29, 2023
Session I Chair:
Prof. Pascal Hubert
Werner Graupe Chair on Sustainable Composites Mfg.
Director, Research Center for High Performance Polymer and Composite Systems
McGill University
Time | Presentation | |
---|---|---|
7:15-8:00 | REGISTRATION / COFFEE MINGLE | |
8:00-8:15 | WELCOME! - by Dr. R. Byron Pipes Distinguished Professor of Engineering, Purdue University Executive Dir. Composites Manufacturing Simulation Center | |
8:15-9:00 | KEYNOTE: Charles L. Tucker III, Ph.D.
Professor Emeritus, University of Illinois-UC "Fiber Orientation Descriptors: How we got here and what comes next" |
Time | Paper # | Presentation & Author(s) |
---|---|---|
9:00-9:30 | 755 | Presenter: James Kratz, University of Bristol Talk: "Application of Lab-based In-situ CT to Composite Forming and Flow Processes" James Kratz, Pedro Galvez-Hernandez, Claudia Jimenez Martin, Arjun Radhakrishnan, Vincent Maes, Mark Mavrogordato and Ian Sinclair |
9:30-10:00 | 7074 | Presenter: Gulsah Bahceli, Delft University Talk: "Influence of Melt Mixing Processing Conditions on Fiber Distribution of Recycled Carbon Fiber Reinforced LM PAEK Composites" Gulsah Bahceli, Bilim Atli-Veltin and Clemens Dransfeld |
10:00-10:30 | Coffee Break | |
10:30-11:00 | 7601 | Presenter: Miro Duhovic, Institute for Composite Materials Talk: "Development of Characterization and Simulation Methods for Carbon Fiber Sheet Molding Compounds" Dominic Schommer, Miro Duhovic, Thomas Hoffmann, Florian Gortner, David May, Joachim Hausmann, Peter Mitschang, Katja Schladitz and Konrad Steiner |
11:00-11:30 | 8155 | Presenter: Donald Baird, Virginia Tech Talk: "Role of Flow Type on the Evolution of Semi- Flexible Fiber Orientation" Donald G Baird and Peter Wapperom |
11:30-12:00 | 9950 |
Presenter: Douglas Smith, Baylor University Talk: "Simulation of Micro-void Development Within Large Scale Polymer Composite Deposition Beads" Aigbe Awenlimobor, Douglas E. Smith, Zhaogui Wang |
12:00-1:30 | Lunch - Walt's Pub & Grill Coach bus will transport you for the 2-minute drive |
Session II Chair:
Dr. Douglas Smith
Professor, Baylor University
Time | Presentation | |
---|---|---|
1:30-2:15 | KEYNOTE: Eduardo Barocio, Ph.D.
Assistant Director Additive Manufacturing, Purdue University CMSC "Flow and Transient Phenomena in Large Scale Additive Manufacturing" |
Time | Paper # | Presentation & Author(s) |
---|---|---|
2:15-2:45 | 4321 | Presenter: Sophie Sharafi, University of Delaware Talk: "Void Formation in Printed Carbon Fiber PAEK Composites" Sophie Sharafi, Michael Santare, Suresh Advani and John Gerdes |
2:45-3:15 | 5075 | Presenter: Deepak Kumar Pokkalla, Oak Ridge National Laboratory Talk: "Predicting Anisotropic Mechanical Properties and Reverse Engineering Process Parameters for Composite Extrusion Additive Manufacturing through Flow Modeling and Micromechanics" Deepak Kumar Pokkalla, Berin Seta, Nikhil Garg, Vipin Kumar, Seokpum Kim, Jon Spangenberg and Ahmed Arabi Hassen |
3:15-3:45 | Coffee Break | |
3:45-4:15 | 9175 | Presenter: Pasita Pibulchinda, Purdue University Talk: "Influence of Printing Conditions on the Extrudate Shape and Fiber Orientation in Extrusion Deposition Additive Manufacturing" Pasita Pibulchinda, Eduardo Barocio, Anthony Favaloro and R. Byron Pipes |
4:15-4:45 | 8172 | Presenter: Jon Spangenberg, Technical University of Denmark Talk: "Flow-induced Fiber Orientation During Material Extrusion Additive Manufacturing" Berin Seta, Michael Sandberg, Marco Brander, Md. Tusher Mollah, Deepak Kumar Pokkalla, Vipin Kumar and Jon Spangenberg |
4:45-5:15 | 9928 |
Presenter: Matthew Hardman, National Composites Centre (UK) Talk: "Numerical Process Simulation of Ultra High-Rate Ply Deposition" Xiaochuan Sun, Matthew Hardman, Navein Madhavan, Eoin Simon, Simon Marshall and Jonathan Belnoue |
5:15-5:45 | 501 |
Presenter: Suresh Advani, University of Delaware Talk: "Statistical Description of the Frictional Forces and the Rheology of SMC Materials During the Compression Molding Process" François Mahé, Christophe Binetruy, Suresh Advani, Julien Férec and Benedikt Eck |
6:00 | Conference day ends. Dinner on your own. |
Session III Chair:
Dr. Stepan Lomov
Emeritus Professor, Faculty of Engineering Science
KU Leuven
Time | Presentation | |
---|---|---|
7:30-8:15 | COFFEE MINGLE | |
8:15-9:00 | KEYNOTE: Conchúr
Ó Brádaigh, FREng FRSE
Head of School of Engineering, University of Edinburgh "Processing of Powder-Epoxy Composite Materials for Large Structures in Marine Renewable Energy" |
Time | Paper # | Presentation & Author(s) |
---|---|---|
9:00-9:30 | 1700 | Presenter: Rehan Umer, Khalifa University of Science and Technology Talk: "Processing and Performance Evaluation of AFP Laid Dry Fiber Preforms and Composites using an Infusible Thermoplastic Resin" Tayyab Khan, Muhammad Ali and Rehan Umer |
9:30-10:00 | 8136 | Presenter: Murat Celik, University of Edinburgh Talk: ”Modelling of In-situ Impregnation During the Production of Powder Epoxy Based Towpregs" Murat Celik, James M. Maguire, Hanisa Hasrin, Thomas Noble, Colin Robert and Conchúr M. Ó Brádaigh |
10:00-10:30 | Coffee Break | |
10:30-11:00 | 2519 | Presenter: Masoud Bodaghi, Luxembourg Institute of Science and Technology (LIST) Talk: "Study on the Causes of Bubbles During Polymerization of an Acrylic-based Infusible Resin Impregnated Glass Fiber Reinforcements During Liquid Composite Molding Family" Masoud Bodaghi, João Machado and Henri Perrin |
11:00-11:30 | 1852 | Presenter: Thomas Cender, University of Delaware, Center for Composite Materials Talk: "Experimental Characterization of Extensional Viscosity of Aligned Discontinuous Fiber Composites" Thomas Cender, Pavel Simacek, John Gillespie and Suresh Advani |
11:30-12:00 | 1741 | Presenter: Loren Tomlin, University of Delaware Talk: "Methodology to Establish a Forming Process Window for Thermoset Aligned Discontinuous Fiber Composites" Loren Tomlin, Tom Cender, Suresh Advani and Steve Sauerbrunn |
12:00-1:30 | Lunch - Walt's Pub & Grill Coach bus will transport you for the 2-minute drive |
Session IV Chair:
Dr. Suresh Advani
George W. Laird Professor, Center for Composite Materials University of Delaware
Time | Presentation | |
---|---|---|
1:30-2:15 | KEYNOTE: Dianyun Zhang, Ph.D. Assistant Professor, Aeronautics & Astronautics Purdue University "An Integrated Multi-Physics Modeling Approach to Liquid Composite Molding Simulation" |
Time | Paper # | Presentation & Author(s) |
---|---|---|
2:15-2:45 | 1136 | Presenter: Matthew Grasinger, United States Air Force Research Laboratory Talk: "Influence of Wetting and Interfacial Phenomena on Void Formation and Transport During Resin Transfer Molding" Matthew Grasinger |
2:45-3:15 | 1243 | Presenter: Andrew George, Brigham Young University Talk: "The Effect of Single-curvature and Intra-plane Shearing on Reinforcement Permeability" Collin Childs, Benjamin Betteridge and Andrew George |
3:15-3:45 | Coffee Break | |
3:45-4:15 | 2662 | Presenter: Baris Caglar, TU Delft Talk: "Deep Learning for Modeling of Multiscale Flow Phenomena in Composites Manufacturing" Baris Caglar and Guillaume Broggi |
4:15-4:45 | 2840 | Presenter: Tim Schmidt, Institute for Composite Materials, Technical University of Kaiserslautern Talk: "Machine Learning For Permeability Determination of Fibrous Structures" Tim Schmidt, Dinesh Krishna Natarajan, Stefano Cassola, David May, Miro Duhovic and Marlon Nuske |
4:45-5:15 | 3833 | Presenter: Stepan Lomov, KU Leuven Talk: "Micro-CT Based Permeability Calculations with a Limited Size of the Model Volume" Stepan Lomov, Sergey Abaimov, Roman Kandinski, Biltu Mahato and Yentl Swolfs |
5:15-5:45 | 7767 | Presenter: Andrew George, Brigham Young University Talk: "Factors affecting in situ void formation during resin infusion" Andrew George, Ben Crawford, Jared Turner, Davide Simone and Hilmar Koerner |
5:45-6:15 | Travel to Banquet location: Neil Armstrong Hall of Engineering Kurz Atrium 701 W. Stadium Ave. West Lafayette, IN 47907 Coach bus transportation provided. Very limited street parking is available |
|
6:15-8:30 | FPCM-15 Banquet Guest Speaker Dr. Sangtae Kim Jay and Cynthia Ihlenfeld Head of Chemical Engineering Purdue University Distinguished Professor “Disk and Rods - Workhorses of Models for Nonspherical Particles and Inclusions” |
|
8:30-9:00 | Coach bus returns to IMI - Adjourn for evening |
Session V Chair:
Dr. Donald Baird
Professor Emeritus, Virginia Tech
Time | Presentation | |
---|---|---|
7:30-8:00 | COFFEE MINGLE | |
8:00-8:45 | KEYNOTE: Florian Wittemann, Ph.D.
Karlsruhe Institute of Technology (KIT)
Institute of Vehicle System Technology – Lightweight Design Division "Fiber Length and Orientation Dependent Flow Modeling in Macroscopic Injection Molding Simulation" |
Time | Paper # | Presentation & Author(s) |
---|---|---|
8:45-9:15 | 1570 | Presenter: Rens Pierik, University of Twente; ThermoPlastic Composites Research Center (TPRC) Talk: "Understanding and Modeling of the Ply-Ply Friction Response for UD C/PAEK Tapes in Melt" Rens Pierik, Wouter Grouve, Sebastiaan Wijskamp and Remko Akkerman |
9:15-9:45 | 7879 | Presenter: Sidharth Sarojini Narayana, McGill University Talk: "Process Development of Compression Resin Transfer Moulding of a Complex Demonstrator Part" Sidharth Sarojini Narayana, Leonardo Barcenas, Lolei Khoun, Nicolas Milliken, Paul Trudeau and Pascal Hubert |
9:45-10:15 | Coffee Break | |
10:15-10:45 | 7156 | Presenter: Dennis Brands, University of Twente Talk: "Modelling the Resistance Against In-plane Shear Deformation of Unidirectional Thermoplastic Composite in Melt from Bias Extension Measurements" Dennis Brands, Wouter Grouve, Sebastiaan Wijskamp and Remko Akkerman |
10:45-11:15 | 8349 | Presenter: Jeeeun Lee, Department of Engineering Science, University of Auckland Talk: "Rate-Dependent Effects in Transverse Liquid Composite Molding Manufacturing Processes" Jeeeun Lee, Miro Duhovic, Tom Allen, David May and Piaras Kelly |
11:15-11:45 | 814 |
Presenter: R. Byron Pipes, Purdue University Talk: "Rheological characterization of thermoplastic polymer continuous fiber prepreg in the melt state." R. Byron Pipes, Eduardo Barocio , Akshay J. Thomas |
11:45-12:15 | 5227 |
Presenter: Henri Perrin, Luxembourg Institute of Science and Technology (LIST) Talk: "On the Relationship Between Hot Press Consolidation Process, Void Content, and Microstructure Morphology of Commingled Flax/PP Laminates" Henri Perrin, Masoud Bodagi, Dorian Delfrari and Régis Vaudemont |
12:15-1:00 | Box Lunch |
Session VI Chair:
Dr. David May
Research Director Digitalization
Manager Digitalized Process & Material Dev.
Institute for Composite Materials
Technical University of Kaiserslautern
Time | Paper # | Presentation & Author(s) |
---|---|---|
1:00-3:00 | 7149 | WORKSHOP ON BENCHMARKING AND STANDARDIZATION ACTIVITIES Elena Syerko, Tim Schmidt, Katja Schladitz, David May, Christophe Binetruy, Luisa Silva, Stepan V. Lomov, Suresh Advani, Ana Yong |
I. "First Insights From the Second Mesoscale Stage of the Virtual Permeability Benchmark on Engineered Textiles" – Elena Syerko, Centrale Nantes - Tim Schmidt, Institute for Composite Materials, Technical University of Kaiserslautern |
||
II. "Novel ISO-Standard on Test Methods for the Experimental Characterization of In-Plane Permeability" - David May, Institute for Composite Materials, Technical University of Kaiserslautern |
||
III. "Experimental Benchmark Studies on Textile Out-of-Plane Permeability and Compressibility" - Ana Yong, National Physical Laboratory, UK |
||
3:00 | CONFERENCE CONCLUDES |