Purdue innovations being commercialized to improve radiation detection, adhesives and sealants

October 9, 2014  


Sagamore-Adams labs

Brian Archambault, from left, Rusi Taleyarkhan and Ron Ragains of Sagamore-Adams Laboratories LLC observe results from the company's sensor technology that uses tensioned fluid to detect radiation. Sagamore-Adams Laboratories has licensed Taleyarkhan's innovations through the Purdue Office of Technology Commercialization. (Purdue Research Foundation photo)
Download Photo

WEST LAFAYETTE, Ind. - Officials at a Chicago-based startup say innovations discovered in Purdue University's School of Nuclear Engineering are being commercialized to address challenges in improving radiation detection and making sealants and adhesives safer.

Rusi Taleyarkhan, chief technology officer at Sagamore-Adams Laboratories LLC and Purdue professor of nuclear engineering, said radiation sensors are used in the security, medical, energy and consumer goods sectors. However, traditional radiation sensors were originally meant for large, nuclear power reactors and not for use in combating nuclear terrorism, or for use in homes or small businesses.

"The currently available radiation detectors are being applied to situations they were not designed for, and they are very expensive," he said. "Because of this cost, on average less than 5 percent of the cargo that enters or leaves the U.S. is scanned for nuclear materials, despite the damage a single nuclear device can cause. The sa

me is true for consumer use of radon detectors. Few homeowners can afford the currently available radon sensors in their homes beyond simple charcoal canisters, despite radon exposure leading to lung cancer and more than 25,000 deaths in the U.S."

Taleyarkhan and other Purdue researchers have developed technology that could lead to radiation sensors that cost less and provide better information than traditional sensors. The technology has been licensed exclusively to Sagamore-Adams Laboratories through the Purdue Office of Technology Commercialization. More than 20 startups based on Purdue intellectual property were launched in the 2014 fiscal year. A video about Sagamore-Adams Laboratories is available at http://youtu.be/CtaN5lesdPE.

Brian Archambault, manager of production technology development, said Sagamore-Adams Laboratories is looking to develop low-cost, efficient and intuitive detectors that allow defense specialists and the general public to see and hear radiation. The technology behaves in a similar way to a stretched rubber band.

"When a rubber band is stretched far enough, it will break upon its own pressure. If you stretch the rubber band just below its breaking point and create a small imperfection, with a pin prick for example, it will break below that level," he said. "We do the same thing with fluids: We increase the tension far enough that femto scale, nuclear particles will interact with it and create cavitations, which are liquid-free areas that look and sound like popping bubbles. Our sensors also will be able to tell the directionality of the radiation, so users can not only detect the presence of radiation but also tell where the radiation is coming from. This feature could benefit defense and security personnel."

Taleyarkhan said Sagamore-Adams Laboratories also is developing radon sensors for homeowners using this technology.

"These sensors with tensioned fluid will provide highly accurate results to homeowners within minutes to hours rather than days and weeks required by traditional systems like charcoal canisters," he said. "The company's goal is to have these available for the U.S. market within a few months."

Sagamore-Adams Laboratories also has developed PLAtech, an adhesive that is made from non-petroleum-based feed stocks like corn, wheat or sugar cane, and is biodegradable under composting conditions. Traditional adhesive sealants are used in automotive manufacturing, plywood manufacturing, flooring and other industries.

"Some adhesives and sealants are very toxic, and people might breathe in volatile organic compounds while making them. We have created PLAtech to be safer than conventional adhesives and sealants, work equally as well, and have a competitive price point," he said. "We can tailor PLAtech's bond strength, flow rate and viscosity for a wide range of applications. We have found that it is a near-universal adhesive that can coat, seal and adhere to wood, plastics, ceramics, metals, carbon fiber, glass and even Teflon."

Sagamore-Adams Laboratories' technology development has received funding from the U.S. Department of Defense, Department of Energy, Department of Homeland Security and the National Science Foundation, along with venture capital. The research also was funded by the Purdue Research Foundation-managed Trask Innovation Fund, a development mechanism to assist faculty with work to further the commercial potential of technologies disclosed to the Purdue Office of Technology Commercialization.

Ron Ragains, chief operating officer, said Sagamore-Adams Laboratories believes in the work of Taleyarkhan and Purdue students at his laboratory.

"There are several innovations being developed by Rusi and his students that are filling vacancies in the world, including the radiation sensors and the PLAtech adhesive. My colleagues and I are involved in commercializing this research because of our confidence and belief in the work these researchers are doing," he said. "We are speaking with several industries and prospective company partners about the sensors and PLAtech."

For information on other Purdue intellectual property ready for licensing and commercialization, visit http://www.otc-prf.org. For more information about available leadership positions, investing in a Purdue startup or licensing a Purdue innovation, visit http://www.purduefoundry.com.

About Sagamore-Adams Laboratories LLC

Sagamore-Adams Laboratories is a startup research, development and customized product supply business headquartered in Chicago. We are a four-member executive team that utilizes as-needed expertise worldwide, but we are currently focused on utilizing graduate and undergraduate students and other staffing, along with infrastructure from Purdue University to assist in three primary technological arenas. Our primary objective is to apply our patented technologies to defense, energy, general industrial, commercial and residential applications.

About Purdue Office of Technology Commercialization

The Purdue Office of Technology Commercialization operates one of the most comprehensive technology-transfer programs among leading research universities in the U.S. Services provided by this office support the economic development initiatives of Purdue University and benefit the university's academic activities. The office is managed by the Purdue Research Foundation, which received the 2014 Incubator Network of the Year from the National Business Incubation Association for its work in entrepreneurship. For more information about funding and investment opportunities in startups based on a Purdue innovation, contact the Purdue Foundry at foundry@prf.org

Purdue Research Foundation contact: Steve Martin, 765-588-3342, sgmartin@prf.org  

Sources: Ron Ragains, 219-218-4585, rragains@salabsllc.com

Brian Archambault, 765-425-3185, barchambault@salabsllc.com 

Rusi Taleyarkhan, 765-237-1728, rusi@salabsllc.com 

Purdue University, 610 Purdue Mall, West Lafayette, IN 47907, (765) 494-4600

© 2014-18 Purdue University | An equal access/equal opportunity university | Integrity Statement | Copyright Complaints | Brand Toolkit | Maintained by Marketing and Media

Trouble with this page? Disability-related accessibility issue? Please contact us at online@purdue.edu so we can help.