Small Conference Room LCD Instructions

Instructions for Samsung LCDs in the four corner conference rooms within the BNC:

Currently, the only use for the LCDs is a projection source from a personal computer. These TV's are not connected to cable or other video sources at this time.

  1. Power on LCD. The power button is located on the bottom on the right side of the unit.
  2. If needed, select source (PC). The source button is located on the top of the right side of the panel.
  3. Connect the PC (gray) cable to your computer.
  4. The LCD should show a mirror image at this time. If problems occur, please check the display settings on your PC, or restart your computer.

For a complete set of instructions for the LCDs, please consult the users manual located here.

* Currently, the only use for the LCDs is a projection source from a personal computer. These TV's are not connected to cable or other video sources at this time.

** Please make sure to power off the displays when finished! Thanks.